The hosted Gitea runner starts the OpenZaak stack as sibling containers via the
host daemon, so a process on the runner can't reach the published ports — the seed
and dotnet test get Connection refused on localhost:8000. Drop the (non-working)
integration CI job; make integration stays the local / host-runner gate. Document
the limitation in gitea-actions-gotchas.md §5 and the CI runbook, and track running
it inside the compose network in #55. ADR-0006 updated accordingly.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
New integration job: setup-dotnet + make integration (stack up, OZ_PUBLISH=1 seed,
Integration-category tests, tear down), with on-failure log dump + teardown like
compose-smoke. Documents the job and the new make target in the CI runbook.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The artifact step failed the mutation job: upload-artifact@v4 bundles
@actions/artifact v2, which hard-aborts on any non-github.com server ("not
supported on GHES"), even though Gitea 1.25 stores artifacts fine. @v3 uses the
older protocol Gitea speaks and has no GHES guard — a drop-in swap (same inputs).
Document it as gotcha §4 and correct the CI runbook note.
Refs #47.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add an upload-artifact step to the mutation job so the ACL mutation report is
downloadable from the run summary. `if: always()` uploads it even when the
ratchet fails — exactly when the survivors matter. A glob handles Stryker's
timestamped output directory. First use of actions/upload-artifact (@v4, pinned);
Gitea 1.25.x supports it. Document it in the CI runbook.
Refs #47.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Record the decision to adopt Stryker.NET (pinned local tool, solution mode on
Acl.slnx) and to set the first repo-wide mutation baseline on the ACL: observed
95%, enforced break threshold 90%. Document the ratchet, local run, and report
location in the CI runbook; add the ADR to the docs nav.
Proposed in #51 (adr-proposal). Refs #47.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds infra/docker-compose.local.yml: the same full stack as the canonical
infra/docker-compose.yml, but the three config inputs (OpenZaak data.yaml,
Keycloak realms, Flowable BPMN) are bind-mounted from the repo instead of
streamed into external volumes by seed-config.sh.
Bind mounts are valid here because a local daemon (Docker Desktop on Windows/
macOS, or rootless Podman on Linux) can see the working directory — the seed
dance only exists for the containerized CI runner, where it can't. So this file
runs with a plain `docker compose up`: no make, no seed step, no bash.
docker compose -f infra/docker-compose.local.yml up -d --build
docker compose -f infra/docker-compose.local.yml up -d --build --wait # Docker Desktop
Linux/macOS convenience wrappers `make local` / `make local-down` added too.
Verified on podman: Keycloak boots from this file and imports the bind-mounted
realms (digid realm returns 200). docs/runbooks/ci.md documents the Windows path.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Drops the inline-build images for the upstream services. The compose now
references the published images directly (openzaak/open-zaak,
openzaak/open-notificaties, keycloak, curl, flowable-rest) with no build for
them, and the config they need is streamed into external named volumes by
infra/seed-config.sh:
rr-oz-config -> oz-init /app/setup_configuration (data.yaml)
rr-kc-realms -> keycloak /opt/keycloak/data/import (realm exports)
rr-fl-bpmn -> flowable-init /work (registratie.bpmn)
How: the seeder creates each volume, `docker create`s a throwaway helper that
mounts it, `docker cp`s the files in, and removes it. docker cp streams over the
Docker API, so it works in Docker-in-Docker (the CI runner) where bind mounts
mount empty. It uses plain `docker create`/`cp` — NOT `docker compose create`,
which podman-compose (local dev) lacks. `external: true` fixed names keep the
volumes identical across docker compose and podman-compose.
Consequence: bare `docker compose up` no longer self-seeds, so use `make up`
(seeds then starts). Every `*-up` target seeds first; `*-down` removes the
external volume. acl/bff are still built (they're our apps, not upstream images).
Verified end-to-end on podman-compose: `make keycloak-up` seeds rr-kc-realms,
the upstream Keycloak mounts it, and --import-realm imports all four realms
(digid realm returns 200). Seeder runs in ~2s.
Docs updated: gitea-actions-gotchas.md, ci.md, openzaak.md.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Run 28 got the full stack healthy but `compose-smoke` still failed. The last
compose line before the error was:
container infra-flowable-init-1 exited (0)
`docker compose up --wait` treats a service that exits as a failure of the
"stay running" condition unless something depends on it via
`service_completed_successfully`. oz-init/nrc-init are fine (openzaak/nrc-web
depend on them), but flowable-init deploys the BPMN and exits 0 with no
dependant, so whole-project `--wait` failed the instant it finished — even
though everything else was healthy and nrc-init now exits 0.
Smoke now:
1. `up -d` starts the full stack (one-shots run + deploy as before), then
2. `up -d --wait <WAIT_SVCS>` waits only for the durable health-checked
services (openzaak nrc-web acl bff).
Also drops the external `curl localhost:8080/health`: the containerized CI
runner can't reach published host ports at localhost, and each service's
healthcheck already runs inside its container — so `--wait` succeeding IS the
smoke. Documented in docs/runbooks/gitea-actions-gotchas.md.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Root cause of the compose-smoke failure (found in the runner logs):
oz-init-1 | CommandError: Yaml file
`/app/setup_configuration/data.yaml` does not exist.
The ubuntu-latest runner runs the job inside a container, so
`docker compose up` starts the stack as SIBLING containers via the host
daemon. A relative bind mount (./openzaak/setup_configuration) resolves to
a path inside the job container that the daemon can't see, so Docker mounts
an empty dir and the init container can't find data.yaml. The same trap hit
nrc-init (data.yaml), flowable-init (the BPMN) and keycloak (realm import).
Fix: bake the assets into small derived images instead of bind-mounting:
- infra/openzaak/Dockerfile -> register-referentie/openzaak:dev
- infra/opennotificaties/Dockerfile-> register-referentie/opennotificaties:dev
- infra/keycloak/Dockerfile -> register-referentie/keycloak:dev
- flowable-init: build.dockerfile_inline bakes workflows/registratie.bpmn
Base versions stay build args (OPENZAAK_TAG / OPENNOTIFICATIES_TAG), so the
pinning is unchanged. Applied to both the consolidated compose and the
per-service composes, so local Podman and CI use one mechanism — no bind
mounts, no SELinux `:z`, no world-readable requirement.
Verified locally: `podman build` of the OpenZaak and BPMN images produces
the file at the expected in-container path.
Docs: docs/runbooks/gitea-actions-gotchas.md explains the DinD bind-mount
trap and the bake fix; openzaak.md and ci.md point at it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Self-hosted respellion-linux runner not required — Gitea's hosted
ubuntu-latest runner has Docker + Compose v2 out of the box, so
make smoke works without any manual registration step.
Updates docs/runbooks/ci.md to reflect the new runner label and
removes the act_runner self-hosted setup as the primary path.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
